Cable Construction

  1. Fluoropolymer Teflon® Jacket (Clear)
  2. Silver-Plated Copper Shield
  3. Aluminum / Polyimide Shield
  4. Silver-Plated Copper Flat Strip Braid
  5. PTFE Dielectric
  6. Silver-Plated Copper Conductor

The S22089 low loss coaxial cable cable is particularly suitable for GPS, TCAS, Mode-S, MLS and SATCOM installations.

This special 50 ohm coaxial cable design incorporates a multi-layered shielding technique that combines conventional shields with an inner shield woven of flat strips of silver plated copper. This “unitized” shield reduces attenuation at frequencies over 1 GHz when compared to round wire braids in standard coaxial cables. Additionally, the cable VSWR is lower because the braids can be applied more uniformly. The attenuation and VSWR variation due to aging and flexure is substantially less.

The S22089 low loss coaxial cable is Skydrol resistant, RoHS compliant and meets the FAA flammability requirements of FAR Part 23 and 25, Appendix F; complies with MIL-C-17.

CALL 800.742.3191 OR EMAIL US REGARDING CABLE AVAILABILITY. Also use our contact page for more info.

S22089 Connectors

50 Ohm ARINC Connectors

DescriptionPart NumberTermination Instructions
ARINC 600 Size 1190401T-190XXX
ARINC 600 Modified Size 1190402T-UH25107

50 Ohm BNC Connectors

DescriptionPart NumberTermination Instructions
BNC Straight Plug190412T-UH25107
BNC 90° Plug190413T-UH25107

50 Ohm C Connectors

DescriptionPart NumberTermination Instructions
C Straight Plug190406T-UH25107
C 90° Plug190407T-UH25107

50 Ohm N Connectors

DescriptionPart NumberTermination Instructions
N Straight Plug190410T-UH25107
N 90° Plug190411T-UH25107
N Inline Jack190424T-UH25107
N Bulkhead Jack190422T-UH25107

50 Ohm TNC Connectors

DescriptionPart NumberTermination Instructions
TNC Straight Plug190408T-UH25107
TNC 90° Plug190409T-UH25107
TNC Inline Jack190423T-UH25107
TNC Bulkhead Jack190421T-UH25107

Die Sets Available On Loan Or For Purchase From PIC
Refer To Connector Drawing For Tooling
Call PIC For Availability