Cable Construction

  1. ETFE Jacket (White) Laser Markable
  2. Tin-Plated Copper Outer Round Braid
  3. Tin-Plated Copper Inner Flat Strip Braid
  4. PTFE Tape Binder – Clear
  5. Fluoropolymer Insulation
  6. Fluoropolymer Filler
  7. Silver-Plated High Strength Copper Alloy Conductors

Color Codes

  • Pair #1 – Red/Blue
  • Pair #2 – Yellow/Green

This lightweight, low loss cable has been specially designed by PIC for airborne 100 Base-T data applications as defined by ARINC Specification 664.

Data transmission aboard aircraft faces more severe environmental and EMI situations than conventional LAN systems in commercial buildings, hence the double shielding to preserve technical performance. The cable is designed to be terminated with ARINC 600 and D38999 quad-type contacts. It is compatible with any contact designed for Tensolite cable part number NF26Q100.

An ETFE jacket protects the cable against abrasion and environmental effects while maintaining flexibility for ease of installation and is laser markable.

E51426 exceeds Category 5e requirements, is Skydrol resistant and meets the FAA flammability requirements of 14 CFR Part FAR 25.869(a)(4) Amdt 25-113 Appendix F Part I (a)(3).


E51426 Connectors

Shielded CAT 5e Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 5e, Plug w/Protective Boot110725T-110725-QX110729
Shielded CAT 5e, Plug w/ATUM Strain Relief110731T-110731-QX110729

Shielded CAT 6 Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 6, Plug w/ATUM Strain Relief (fits Amphenol (RJF) ruggedized backshell)110790T-110790-QX110729

Shielded CAT 6a Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 6a, Jack w/ATUM Strain Relief110939T-110939-01110701

Call PIC For Availability