Cable Construction

  1. ETFE Jacket (White) Laser Markable
  2. Tin-Plated Copper Outer Round Braid
  3. Tin-Plated Copper Inner Flat Strip Braid
  4. PTFE Tape Binder – White
  5. Fluoropolymer Insulation
  6. Fluoropolymer Filler
  7. Silver-Plated High Strength Copper Alloy Conductors

Color Codes

  • Pair #1 – Red/Blue
  • Pair #2 – Yellow/Green

This lightweight, low loss cable has been specially designed by PIC for airborne 100 Base-T data applications as defined by ARINC Specification 664.

The conductor insulation is foamed fluoropolymer making it small, light and low loss. Data transmission aboard aircraft faces more severe environmental and EMI situations than conventional LAN systems in commercial buildings, hence the double shielding to preserve technical performance. The cable is designed to be terminated with ARINC 600 and D38999 quad-type contacts. It is compatible with any contact designed for Tensolite cable part number NF24Q100.

An ETFE jacket protects the cable against abrasion and environmental effects while maintaining flexibility for ease of installation and is laser markable.

E51424 exceeds Category 5e requirements, is Skydrol resistant, RoHS compliant and passes the FAA flammability requirements of FAR Part 23 and 25, Appendix F. Test results are available upon request.


E51424 Connectors

Shielded CAT 5e Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 5e, Plug w/Protective Boot110726T-110726110288
Shielded CAT 5e, Plug w/ATUM Strain Relief110558T-110558110288

Shielded CAT 6 Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 6, Plug w/ATUM Strain Relief (fits Amphenol (RJF) ruggedized backshell)110789T-110789-01110288

Shielded CAT 6a Connectors

DescriptionPart NumberTermination InstructionsTool Part Number
Shielded CAT 6a, Jack w/ATUM Strain Relief110939T-110939-01110701

Call PIC For Availability